#Airshot tire inflator free#

You can either fill or purge air via a presta valve on the top of the air can. AirShot has a capacity of 1.15 Liters and a max air pressure of 160 PSI. Pressurised using an ordinary track pump. The AirShot is a tidy little air reservoir that provides the necessary volume and velocity to set a tire on your rim.

#Airshot tire inflator free#

The POP of the tire as it seats on the rim is the greatest sound in the world for any rider or racer that wants to fit a tubeless tire, and Airshot will deliver that to you. Tubeless tyres can be a hassle to inflate without a compressor - this is where the Airshot comes in handy The Airshot is pressurised using an ordinary floor pump, then air can be released in a rapid but controlled fashion for tyre inflation. Airshot has been developed to enable hassle free inflation of tubeless tyres without the need for a compressor. With PORTABILITY and small size, the Airshot can be easily stored in your home or carry in your trunk when riding far from home giving you peace of mind when is time to seat your tire on the rim. SAFE and SECURE, with a tested pressure up to 160psi (11atm) and Presta valve compatible, you will forget about the compressor or CO2 inflator when you work on your tubeless wheels. Say goodbye to frustration and empty CO2 cartridges. SIMPLE and EFFICIENT, the Airshot is designed to work with your existing bicycle floor pump and eliminate waste and misuse of the CO2 cartridges. The MotoPumps® Air Shot 2.0 is not intended for large or high pressure truck tires. Air is released in a rapid but controlled fashion via a release tap. A pressurized chamber using an ordinary bike pump seats the bead.

The Air Shot 2.0 will inflate a Neutech TUBliss chamber to 110 psi in about a minute. Depending on the tire marks of wheels or wheels, tubeless mounting is more or less complicated and sometimes impossible without a compressor, with the Airshot. Airshots solution for hassle-free inflation of tubeless tires. They add about 15 psi per minute when airing up a typical motorcycle or ATV tire.

Make sure this fits by entering your model number.ĬOMPATIBLE with all tire sizes: 26″, 27.5″, 27.5+”, 29″, “29+”, MTB, road, cyclocross and fat bikes, the Airshot holds enough air to seat your tires on the rims every time you need to change your tubeless tire or replace the tubeless tire sealant. The Air Shot 2.0 will inflate an average motorcycle tire to 42 PSI in about 3.5-4 minutes.